Biomaser CTGE004 PMU & Tattoo Machine

Description

Biomaser CTGE004 is a corded PMU handpiece with two interfaces – one for universal cartridges and one for BMX screw needles – sold as a kit with the Thunderlord P90 touchscreen power supply.

Key info

• Handpiece: CTGE004, rose gold
• Power supply: Thunderlord P90 mini touchscreen
• Interfaces: universal cartridge + threaded BMX screw needle

Buying guide

• Wired means steady power from a power supply for the whole session, with a cord to manage.
• Stroke length: about 1.8–2.5mm suits soft, layered shading; about 3.0–3.5mm packs colour better and suits thicker skin. Long strokes (4mm+) hit harder and are usually avoided for eyeliner and delicate skin.
• Needle hang is how far the needle sticks out of the cartridge. A common PMU starting point is about 2–2.5mm, but real depth also depends on your hand pressure, stretch and angle.
• Voltage controls speed – how often the needle enters the skin. PMU work usually runs at lower voltage than body tattooing; practise your hand speed at different settings on practice skin.
• Use sterile, single-use membrane cartridges – the membrane stops pigment flowing back into the machine. Check which cartridge type your machine takes before ordering needles.
• India runs on 230V / 50Hz – check the charger or power-supply label before plugging in.

How to use

• Connect the machine to the power supply with the RCA cord and check the power-supply label for 230V use.
• Fit a new sterile cartridge for every client and cover the machine and cord with barrier sleeves.
• Start at a low voltage and test on practice skin, then adjust.
• Disinfect the machine after each client and follow the manual in the box.

Who it's for

Trained PMU artists. If you're learning, practise on PMU practice skin before working on clients.